Active Klimax Filters (KXO) for Ninka:SOLD

Moderator: Staff

Locked
xanlin
Member
Member
Posts: 47
Joined: 2009-03-28 01:10

Active Klimax Filters (KXO) for Ninka:SOLD

Post by xanlin »

Very rare set of Analog Klimax Crossovers for Linn Ninka
These are the Ninka Version of the much sought after Klimax Filters for Keltik.
The Ninka version is even more rare and only produced in very limited numbers.
The filters will also work for Keilidh, 5120 an Ekwal speakers.

Price 15000:- SEK
1250 GBP

PM for more information
Last edited by xanlin on 2019-06-26 13:08, edited 2 times in total.
User avatar
Sound Hound
Active Member
Active Member
Posts: 53
Joined: 2014-09-12 19:39
Location: UK

Re: Active Klimax Filters (KXO) for Ninka/Keilidh/5120

Post by Sound Hound »

I'm a little Konfused! As far as I know KXOs were specific to a particular speaker - so how would/could you reset them for completely different speakers such Keilidh, 5120 etc which would have different XO settings??
xanlin
Member
Member
Posts: 47
Joined: 2009-03-28 01:10

Re: Active Klimax Filters (KXO) for Ninka:Reserved

Post by xanlin »

Ninka and Keilidh share the active same filters as they are very similar in construction.
The 5120 is also very similar.
You can say the same with Katan/Tukan/Sekrit
See the image and you can see for which speakers the filters can be manifactured for.
Besides the Tukan an Keilidh variants the are one variant for Keltik and one for 5140/Espek
You do not have the required permissions to view the files attached to this post.
DoomHammer
Active Member
Active Member
Posts: 52
Joined: 2013-11-22 10:30
Location: Poland

Re: Active Klimax Filters (KXO) for Ninka:Reserved

Post by DoomHammer »

Wait a moment. Do you suggest these work for Katan as well? :>
User avatar
Sound Hound
Active Member
Active Member
Posts: 53
Joined: 2014-09-12 19:39
Location: UK

Re: Active Klimax Filters (KXO) for Ninka:Reserved

Post by Sound Hound »

Interesting! From your photo I can see that the board is set for Keilidh/5120 (a surface mount resistor has been fitted at the R602 position) to set the filter for any of the other speakers shown, this resistor would have to be removed and the resistor for that speaker selection soldered in the relevant position. I can glean little more from your zoomed in photo other than that an accompanying PCAS board specific to the required speaker may also need to be fitted?
Could you post another photo - from much further away so we can see exactly what we're looking at please?
User avatar
lejonklou
Administrator
Administrator
Posts: 6524
Joined: 2007-01-30 10:38
Location: Sweden
Contact:

Re: Active Klimax Filters (KXO) for Ninka:Reserved

Post by lejonklou »

You're misunderstanding what this pictures shows.

This filter is not adjustable for the speakers mentioned on the board. The resistor is there simply to show which filter this particular board is.

The empty circuit board is designed for all the speaker models.
The components fitted differ between speaker models.
When components are fitted, this ID resistor is also fitted, to make it easier to identify which speaker it's made for.

As Xanlin writes, all speaker models mentioned in the same row share the same filter settings.
DoomHammer
Active Member
Active Member
Posts: 52
Joined: 2013-11-22 10:30
Location: Poland

Re: Active Klimax Filters (KXO) for Ninka:Reserved

Post by DoomHammer »

That explains everything. Thanks!
User avatar
Sound Hound
Active Member
Active Member
Posts: 53
Joined: 2014-09-12 19:39
Location: UK

Re: Active Klimax Filters (KXO) for Ninka:Reserved

Post by Sound Hound »

You're right Frederik! - I couldn't hope to fully understand a photo of part of a PCB I'd never seen before.

I was 99.9% sure it would take more than just moving one resistor to make the filter work for the other speakers depicted on the board - you have confirmed my suspicions - thankyou!
However, I remain surprised that a filter for a ported speaker (5120) would work perfectly for the sealed box Keilidh, but then I'm not a speaker design expert!
DoomHammer
Active Member
Active Member
Posts: 52
Joined: 2013-11-22 10:30
Location: Poland

Re: Active Klimax Filters (KXO) for Ninka:Reserved

Post by DoomHammer »

Once again out of curiosity: can we see the back panel of the filters?
Locked