Optimal torque settings for ninka
Moderator: Staff
-
- New member
- Posts: 9
- Joined: 2015-02-22 23:01
Optimal torque settings for ninka
Can someone suggest the optimal torque settings for my ninka speakers
Re: Optimal torque settings for ninka
Good post from Tom here should get you going:
http://www.lejonklou.com/forum/viewtopi ... 5&start=25
Just to reiterate, they are best used as a starting off point. You'll get more benefit if you tune by ear yourself.
http://www.lejonklou.com/forum/viewtopi ... 5&start=25
Just to reiterate, they are best used as a starting off point. You'll get more benefit if you tune by ear yourself.
-
- New member
- Posts: 9
- Joined: 2015-02-22 23:01
Re: Optimal torque settings for ninka
Thank you for that link but what is the setting for the bas unit on ninka?
- Tendaberry
- Very active member
- Posts: 987
- Joined: 2010-08-30 16:08
- Location: Hamburg
Re: Optimal torque settings for ninka
I'm reopening this thread, in case someone has found the optimum torque values for tweeter and bass units by now.
Re: Optimal torque settings for ninka
Ninka woofer 1.2 NmTendaberry wrote: ↑2020-06-27 14:02 I'm reopening this thread, in case someone has found the optimum torque values for tweeter and bass units by now.
Ninka tweeter 1.2 Nm (+2 steps if you have the CAL 36/4 tool, if you don't then 1.2 Nm will do)
- Tendaberry
- Very active member
- Posts: 987
- Joined: 2010-08-30 16:08
- Location: Hamburg
Re: Optimal torque settings for ninka
Big thanks :-)