How to remove lid - Chakra amps?

We use the Tune Method to evaluate performance

Moderator: Staff

Post Reply
Music at Home
Active member
Active member
Posts: 120
Joined: 2008-10-09 16:10

How to remove lid - Chakra amps?

Post by Music at Home »

Help! I'm trying to remove the lid of my 4100 so I can fit the internal links. I'm sure it's as simple as removing the four screws, 2 either side, underneath and near the left and right hand edge of the amp. Done that, but the lid is refusing to move and I don't want to force it. I can see some larger bolt on the bottom panel and a couple of screws at the back, but these don't appear to be holding the outer case so not touched these.

Not sure if it makes a difference but this is a 4100/1 model, the one with the on/off switch moved to the front.

Any hints and tips for a recalcitrant lid that refuses to budge?
Music at Home
Active member
Active member
Posts: 120
Joined: 2008-10-09 16:10

Re: How to remove lid - Chakra amps?

Post by Music at Home »

Typical. After posting the above, I went back to give it another try, and the thing slid right off.

Not sure if it's a /1 case thing but the outer case has a tongue sticking out from the top front edge that clicks into a socket in the front panel. It probably took a slight press of the top of the case at the front whilst pushing back to disengage the case. When it went back, it certainly went back in with a very positive click.
Post Reply