kikin+2 linn amps+akurate 242
Moderator: Staff
kikin+2 linn amps+akurate 242
I have just bought a pair of akurate 242 and I want to go active, so plan to add aa akurate 242 to my C6100. How can I do that ? Thanks for your help
kikin+2linn amps+akurate 242
I made a mistake , I meant = how can I connect my kikin 2 to a linn C6100 and an akurate 4200 and then to my akurate 242. Thanks for giving me your opinion.
Great choise! You could check out the >manual<, but if you are not into setting-up Linn speakers (as your question implies) I recommend that you get in contact with an experienced Linn dealer who will sort these things out for you and install the speakers properly at the same time. As careful positioning (down to the last mm) is essential for taking fulla advantage of your set-up. It will be woth every penny!
Connecting the Kikkin to the amps is straightforward - just connect the Kikkin to one of the amps (I'd recommend the amp driving the tweeters) and connect that amp to the second amp. Linn amps have both line in and line out connectors to allow this daisy-chaining.
Connecting the amps to the speakers when you are using 5 channels per speaker is more complicated. If you aren't comfortable with doing this I would highly recommend having a professional do it as errors can result in damage to the speakers and/or amps.
Connecting the amps to the speakers when you are using 5 channels per speaker is more complicated. If you aren't comfortable with doing this I would highly recommend having a professional do it as errors can result in damage to the speakers and/or amps.
That's correct. The serial number cutoff is 1144285 for the new versions. I amy have a line on a set of these cards if you need them.Pol wrote:By the way , can anybody confirm that with my akurate 242 serial number 901851/52 I need to buy CHAKT 1/2/3/4/5 (the first generation of ackiv card) to run my system activ ?
Thanks for your reply