Road Runner 2 - HAKAI 5
Posted: 2019-01-12 18:02
POST beeps that is!
I re-imaged the HAKAI with SSH & without a desktop environment, and it worked as before (still no ALAC w/ Kazoo) but, now that I run it headless, it beeps 5 times at POST. Checking the Interwebs, 5 beeps is anything from catastrophic cpu failure during Power-On Self-Test to 'a process error'...
Digging through the AMI website, I found this in the Aptio Status Codes pdf:
I guess 5 beeps are to be expected, then, since there's no monitor or keyboard connected. Presumably it's the same experience for others, and there's no way to disable this?
HAKAI is up & running fine like a Road Runner, if you ignore the Wile E. Coyote-ness of 'Acme Kazoo' with ALAC, but that's another (unfinished) story...
I re-imaged the HAKAI with SSH & without a desktop environment, and it worked as before (still no ALAC w/ Kazoo) but, now that I run it headless, it beeps 5 times at POST. Checking the Interwebs, 5 beeps is anything from catastrophic cpu failure during Power-On Self-Test to 'a process error'...
Digging through the AMI website, I found this in the Aptio Status Codes pdf:
Code: Select all
DXE Beep Codes
# of Beeps Description
1 Invalid password
4 Some of the Architectural Protocols are not available
5 No Console Output Devices are found
5 No Console Input Devices are found
6 Flash update is failed
7 Reset protocol is not available
8 Platform PCI resource requirements cannot be met
HAKAI is up & running fine like a Road Runner, if you ignore the Wile E. Coyote-ness of 'Acme Kazoo' with ALAC, but that's another (unfinished) story...