Linnofil wrote:But Tiger paw? I know there is a Lions claw at Linns back, but now this, a Tiger paw? For a Swede that sounds like a very uncreative name for some (hopefully) creative products.

Possibly they are targeting the Far Eastern Market.

KR

matthias

It certainly does look interesting. I wish they had posted a photo of the underside so I could see the suspension bolts. Since they obviously don't go through the top plate and they talk about them also being machined I am curious to see how they are implemented. At £800 it is a lot more costly tha...

Tony Tune-age wrote:
That should stimulate some interest, and opinions ! ! !

+1

matthias

http://forums.linn.co.uk/bb/showthread.php?tid=12805

KR

matthias

A new audiophile audio player for MacOSX:

http://sbooth.org/AyreWave/

KR

matthias

I almost forgot about the LP12. While I didn’t compare the LP12 on the Mimer vs. the Archidee in the latest listening sessions, I suppose the fact that the LP12 is still on the Archidee is probably telling enough, but I must say that the LP12 on the Mimer did sound quite good. Debbie and I both fel...

Yes. I believe the optimal connection is to use a Linn Silver unbalanced cable with an XLR in the speaker end. That the Kikkin is inverting phase is really easy to correct in the cable: The unbalanced signal should go to the inverting (cold) input of the XLR. And ground should go to ground and non-...

matthias wrote:
Many thanks, Thomas
One final point is important: Kikkin is inverting phase.

KR

matthias

Fredrik, are there any additional comments from your side?

KR

matthias

I have no personal experience with the Kikkin but I see no reason why they should not be a good match. The ATCs work well with Linn preamps and I suspect the output impedance of the Kikkin is likely in the same range. Since indications are that the Kikkin is musically competitive with an Akurate Ko...

A friend of mine wants to buy a Kikkin and a pair of ATC SCM50ASL.

My question for all experienced with ATCs, e.g. ThomasOK:

Would both make a good match?

KR

matthias

I have a Kisto and would realy like to test with a Dynamik... is it possible? ...if not official... Check the voltages at the 10 pin-Connector of the old PS and compare with the voltages at the Connector of the Dynamik PS. If they have the same value you can connect the Dynamik and enjoy the better...

I have a Kisto and would realy like to test with a Dynamik... is it possible? ...if not official... Check the voltages at the 10 pin-Connector of the old PS and compare with the voltages at the Connector of the Dynamik PS. If they have the same value you can connect the Dynamik and enjoy the better...

Regarding the Radikal, it's obvious that any improvement in it's power supply will be very important indeed, as it's powering not only the motor but also the Urika. ... Or the Miniline is inferior to the Dynamik, but Linn doesn't want to admit they can drastically improve the Radikal. Being a brand...

Thomas,

what about upgrading the Radikal with the Dynamik Power Supply ?

KR

matthias

http://forums.naim-audio.com/eve/forums ... 7422981227

Kind regards

matthias

Sorry, Charlie1,

you are right:

The Radikal seems to be more important than the Keel..........

Kind regards

matthias

[quote="Charlie1"]Picked up some early feedback on the new products and it was felt that the Radikal is a slightly bigger upgrade than Keel although they were not compared directly using tune dem. [/quote] Sorry, but you are not right. In order of the hierarchy of the LP12 you have to do first the K...

The story with the two Lintos continous:

At the demonstration of a dealer in London with Radikal and Urika a LP12 with two Radikals (one for the Motor and one for the Urika) was clearly superior to the one with only one Radikal................!!!

matthias

There are a lot of informations at the Linn Forum: 1.) New LP12-motor: There are rumours that it is a (brushless) DC-Motor.... 2.) New MC-Preamp: The Preamp w/o PS sits inside the LP12 and is fixed to the Trampolin2 3.) New PS for the motor and the new PS for the MC-Preamp are sitting both together ...

I have a stainless steel top plate for LP12 with 7:30 h motor position for sale. The top plate is fixed with two additional stainless steel bolts at the front left corner and two additional stainless steel bolts at the rear left corner. The bolts are not raising above the surface of the plate. There...

Fredrik, I like your concept of having a MM cartridge in a high quality arm and therefore having lower cost per hour of music played.

Looking at your great system the ideal supplement to your active Katans could be a Klimax 345 sub.......................?

matthias

Dear Fredrik,

we would appreciate very much to get some insights in your system.

We know there is LP12SE with Adikt and Slipsik, Kikkin? and ............?

Best regards

matthias

Thomas and Fredrik,

what about using two subs, one for the right and one for the left?
There should be no problems with ground loops and you will get two REL B1 subs for the price of one Klimax 345 sub......

Do you have any experiences with this configuration?

matthias

There is a new japanese LP12-Table:


www.andante-largo.com


They tell:

"We only endorse and apply the "Tune Demo" as recommended by Linn. This ensures the most musical possible performance from our tables."


Any experiences, any comments?

matthias

Lejonklou wrote:
I am currently enjoying music with two Kikkins, using one for each channel. Quite an interesting improvement.

Fredrik,

please, would you share with us your experiences regarding this configuration?

matthias