I have a Kisto and would realy like to test with a Dynamik... is it possible? ...if not official... Check the voltages at the 10 pin-Connector of the old PS and compare with the voltages at the Connector of the Dynamik PS. If they have the same value you can connect the Dynamik and enjoy the better...

I have a Kisto and would realy like to test with a Dynamik... is it possible? ...if not official... Check the voltages at the 10 pin-Connector of the old PS and compare with the voltages at the Connector of the Dynamik PS. If they have the same value you can connect the Dynamik and enjoy the better...

Regarding the Radikal, it's obvious that any improvement in it's power supply will be very important indeed, as it's powering not only the motor but also the Urika. ... Or the Miniline is inferior to the Dynamik, but Linn doesn't want to admit they can drastically improve the Radikal. Being a brand...

Thomas,

what about upgrading the Radikal with the Dynamik Power Supply ?

KR

matthias

http://forums.naim-audio.com/eve/forums ... 7422981227

Kind regards

matthias

Sorry, Charlie1,

you are right:

The Radikal seems to be more important than the Keel..........

Kind regards

matthias

[quote="Charlie1"]Picked up some early feedback on the new products and it was felt that the Radikal is a slightly bigger upgrade than Keel although they were not compared directly using tune dem. [/quote] Sorry, but you are not right. In order of the hierarchy of the LP12 you have to do first the K...

The story with the two Lintos continous:

At the demonstration of a dealer in London with Radikal and Urika a LP12 with two Radikals (one for the Motor and one for the Urika) was clearly superior to the one with only one Radikal................!!!

matthias

There are a lot of informations at the Linn Forum: 1.) New LP12-motor: There are rumours that it is a (brushless) DC-Motor.... 2.) New MC-Preamp: The Preamp w/o PS sits inside the LP12 and is fixed to the Trampolin2 3.) New PS for the motor and the new PS for the MC-Preamp are sitting both together ...

I have a stainless steel top plate for LP12 with 7:30 h motor position for sale. The top plate is fixed with two additional stainless steel bolts at the front left corner and two additional stainless steel bolts at the rear left corner. The bolts are not raising above the surface of the plate. There...

Fredrik, I like your concept of having a MM cartridge in a high quality arm and therefore having lower cost per hour of music played.

Looking at your great system the ideal supplement to your active Katans could be a Klimax 345 sub.......................?

matthias

Dear Fredrik,

we would appreciate very much to get some insights in your system.

We know there is LP12SE with Adikt and Slipsik, Kikkin? and ............?

Best regards

matthias

Thomas and Fredrik,

what about using two subs, one for the right and one for the left?
There should be no problems with ground loops and you will get two REL B1 subs for the price of one Klimax 345 sub......

Do you have any experiences with this configuration?

matthias

There is a new japanese LP12-Table:


www.andante-largo.com


They tell:

"We only endorse and apply the "Tune Demo" as recommended by Linn. This ensures the most musical possible performance from our tables."


Any experiences, any comments?

matthias

Lejonklou wrote:
I am currently enjoying music with two Kikkins, using one for each channel. Quite an interesting improvement.

Fredrik,

please, would you share with us your experiences regarding this configuration?

matthias

Fredrik,

kikkin beats akurate kontrol ?

kikkin SE beats klimax kontrol???

matthias

Where are the comments regarding kikkin@tonlaget??????????????????????

There are a lot of comments at the selleri-forum.

It is a pity that I am not able to understand swedish.......

matthias

Dear Mr. Lejonklou,

is it possible to post some photos of the Kikkin for all, who can not attend the first musical evening at Tonlaget in Gothenburg?

When will Kikkin be at your product page?

Best regards

matthias

Hello,

recently I recapped my Exposure 4DR Power Amp with four EPCOS SIKOREL caps. Very expensive, very good.

matthias

Thomas,

did you compare your ATC100 with the new subwoofer versus the ATC150 without subwoofer?

Regards

matthias

Hi Fredrik, thank you for your welcome-greetings. I think we understand the same way. Each pair represents one channel. I recommend not to cut the two pairs the whole lenght of the cable but only at the both ends for connectings the two channels. On the way from the amplfier to the loudpeakers the c...

Hello, has anybody tried using one Silver balanced in a naim-configuration with the shield connected to ground at both ends and one of the two internal conductors is connected to the left channel and the other conductor is connected to the right channel? At the ends you have DIN or unbalanced XLR-pl...

Hello, has anybody tried using the K400 in a single-wiring configuration: 1.)You separate the wire in the middle between the two pairs at the amplifier side for connecting the knekt bananas to the left and right channel. 2.)The cable is left intact running all the way to the speakers. 3.)At the loud...