Matteo wrote: ↑2024-02-15 13:01 From their website or Amazon US?

I have used their website. Arrived in Sweden after just a few days.

I suspect it will be difficult to find a second hand BJC Cat 6a, so why not order one directly from them in Seattle, Washington?

Specify the length to 8.5 feet and use the shipping option with customs pre-paid. Worked like a charm for me last time.

Those would absolutely work. How they sound I don’t know.

I’ve been trying to figure out if there’s a more optimal way to do the physical connection, one that doesn’t in any way degrade the signal to the loudspeakers. But I don’t yet have such a solution.

Spannko wrote: ↑2024-02-06 12:04 I notice there are 9 different hardware versions of the MR200. Which one are you using?

It says: TP-link Archer MR200 v4

I notice there are 9 different hardware versions of the MR200. Which one are you using? I’ll get one and record some comparisons against the two different Zyxel 4/5G routers I have available, plus another 4G router I can try if my SIM card fits. Sound great! I will check. "(an older TP-link which s...

Do you mean using a 4G/5G router, Spannko? I use a TP-link Archer MR200 4G-router in my lab. It’s powered from a strip with 3 outlets that powers nothing else. An 8.5 feet Blue Jeans Cable CAT 6a connects MR200 to Källa. No switch is necessary, as it only degrades the music when inserted between MR2...

Didn’t mean to destroy you, erho. What I meant is that to me it sounds like big improvements are possible!

I loved your cat, but found it difficult to pick a favourite, maybe no. 2. thank you, 15, 25 and 35 cm distance from the back wall just saw that I made a mistake when uploading, here are the right ones : 1. https://drive.google.com/file/d/1HgKVzUavrSm-oLL3APJjdC3PihxNxfnA/view?usp=share_link 2. htt...

Looking forward to it, erho! When listening to clips, all of the nice, detailed sound in the room is destroyed. This can turn some people off, because the clips don’t sound that good. But it’s also actually helpful, because you get to hear a raw version of how the speakers and the room are interacti...

Thank you! That looks like far less than 60 cm from the rear wall? Yes thats 30 cm, can you recommend me some tuning? Is the Ikea Kallax device between the speakers too high or too large? The only way is to methodically move the speakers around and listen. Change track if you don't get a sense of b...

Thank you!

That looks like far less than 60 cm from the rear wall?

I get too much bass when I pull my speakers nearer against the wall, I find 60cm is the minimum or perhaps I am hearing wrong and do not understand Tune method. What speakers are that, erho? And what does the room look like? How wide is the wall behind the speakers and how close is the nearest corn...

I prefer without.

And as I've likely said before: Such a stylish and cozy room!

Thank you TMV! I need to try this.

And you should try a GS108T switch in between Amplifi and Källa, powered by the “digital power strip” that now feeds Amplifi, Amplifi and NAS. I think you will like it a lot.

Thank you! But how are they powered?

Can you explain how you connect everything, TMV?

If possible with a sketch like the recommended setup.

Very interesting, Spannko! Thank you for sharing.

I do too! Sounds very promising.

I have so many questions about this project. I’ll start with the first: Why the upward mounting of the mid/bass driver? Did you try mounting it above or below the tweeter and what were your conclusions?

Another review, this time in French! 🇫🇷

https://lejonklou.com/AMPLI%20CASQUE%20 ... A%2321.pdf

Did you desolder and then resolder the cable or did you cut it? I have a special cable that I've used for small mass joint comparisons for at least a decade. I still have more than 50 of them so I can let the joints age and hear the impact of time and burn-in. I first make sure they sound exactly t...

The single joint soldered with these temperatures was the inner (signal) lead on the single RCA interconnect between Källa and one Sagatun Mono. IIUC, the soldering was done on a Linn Silver IC on the Källa end or the SM end or on both ends? Not a Silver IC, but a cable I use for these tests only. ...

Fredrik, with this knowledge in hand do you think you'll be able to produce interconnects that's even better than Linn Silver? If so then you'll have me and very likely a bunch of other people lining up to buy a pair! I have tried and failed. Maybe one day I will succeed. Just bought myself a pair ...

Thank you for your replies! Clip 1 was 666 degrees Fahrenheit = 352.2 degrees Celsius Clip 2 was 667 degrees Fahrenheit = 352.8 degrees Celsius Clip 3 was 667.4 degrees Fahrenheit = 353 degrees Celsius Clip 4 was 668 degrees Fahrenheit = 353.3 degrees Celsius Clip 5 was 669 degrees Fahrenheit = 353....

I do use my own amplifiers, every day. This system, however, consists of Källa, Sagatun Mono and JBL708P. It’s really good for movies and pretty good for music. The 708’s have certain strengths which are fundamentally different from those of Klångedang T1’s (which I find more musical but they strugg...

I don’t know exactly what Roon Rock consists of, but I recommend staying well away from their software if you care about music. Källa works with Roon (well at least so far it has) but looses its magic. This is because the optimised timing of Protokoll is messed up by Roon taking charge of what is pl...