ThomasOK wrote:Mike has PMed me and I sent him the information. Charlie1 is correct on the starting point for the circuit boards - my finding was extremely close to the .4Nm mark.

Thanks everybody for the information on the Radikal.

Mike

Tony Tune-age wrote:

minge wrote:Does anybody know the right torque for the 14 screws inside the Radikal?

ThomasOK has the exact torque settings for all fourteen screws, and there is a post on this forum which contains this information.

I hae searched but cant fint the thread anybody ho can help?
Mike

Does anybody know the right torque for the 14 screws inside the Radikal?

Mike

So it seems to be the best to combine Tundra not with Linn speakers but with high sensitivity speakers. Please don't be offended, matthias, but your conclusion is exactly the reason why I wanted to avoid publishing power figures for Tundra. Why? Because then everyone would have to try in real life ...

Music Lover wrote:Congratulations!
Good Luck with the demo Fredrik

How long after the release is it possible to buy Tundra?

Mike

Linn Akiva cartridge aprox 750h perfect stand checked by a dealer 1350 Euro.

Mike

SaltyDog wrote:Congratulations!

So exited Fredrik have you decided whats the price gonna be?

Mike

I don't remember exactly what I wrote, Matthias, but I suspect my comment was theoretical and regarding an alternative way of distributing the gain in a HiFi system. It's true that most of the time, we use the preamp as an attenuator. Which means that it lowers the volume of the signal from the sou...

ocoro02 wrote:That rather spookily matches my Renew DS. It's a 2 eyed version!

Thanks looks very nice can't wait to hear it.

Mike

Is there any exact date when Tundra is gonna be released? No, no exact day has been set. Tundra is being tested for EMC (electromagnetic compatibility), which I expect will go well. In the meantime, I'm checking alternative companies to do the painting of the enclosures. The current finish is ok, b...

Wolfie wrote:

lejonklou wrote:First of all, I will visit my current retailers What You See and Hear, Cymbiosis and Hidden Systems and play it to them.

Excellent - I shall await Colin Macey's (trusted) opinion!

Mick

Is there any exact date when Tundra is gonna be released?

Mike

...the diametric opposite to "dollhouse high fidelity". Never heard that expression before, but I think I know what you mean! Which loudspeaker played the key role in the development of the Tundra? Different models of speakers were used, big and small. In the living room at home I have 109's and a ...

Is there any optimal torque Nm for Linn LP12 Akiva cartridge,Tramplin2 etc?
Mike

lejonklou wrote:The only update that I can give you, Mike, is that Tundra won't be released before Christmas. It will most likely take another month.

Thats mean no Christmas present for me gonna call Santa not to come home this year=)

Tony Tune-age wrote:Be sure to report back and let us know your thoughts, especially if you can compare them against the Linn amplifiers. The new Tundra power amplifiers have been mentioned on other forums already...major headlines.

Any uppdates?

Mike

Final price is not set, but a rough estimate is around 30.000 SEK (=3300€=£2900=$4700). Wow. If it can compete with Linn Solos and appeal to those who appreciate what Linn do, that's the sort of price that will have an impact. Very interesting. Even I could afford it, although the s/h market might ...

Thanks just bought a new Power strip from Claes Ohlsson gonna do a test. Worth comparing your Claes Ohlsson with the simplest (and probably cheapest) one you can find in a DIY store - i.e. no power surge protection or on/off switch etc. It is funny how Clas Olson power strip can sound so good it on...

I prefer to connect the sources closest to where the mains power enters the strip. Mains power entrance - LP12 - DS - Pre amp - Power amp I have tried both ways (at Fredrik's suggestion) and I agree. It is more tuneful with the sources first and power amps last. Naim recommends the reverse and it d...

In what order should you put the hifi in the Power strip do you begin with poweramp,preamp,LP12,Renew DS or am i wrong?
Minge

I think single amping and single wiring passive 109's sounds best. But with a 4200, you only need one 2200 and a set of aktiv cards to go aktiv. Nice upgrade, although a bit expensive, of course. Got to go listening to Isobarik with aktive bas and Akurate 4200 anybody heard them with Akurate 4200? ...

In my opinion, single wiring the 109's is way superior to bi- or triwiring. The Treble + and - inputs should be used. I haven't been able to try bi- or triwiring here at the store but did try the different ways of connecting to the terminals and agree that Treble + and - inputs are the most musical...

In my opinion, single wiring the 109's is way superior to bi- or triwiring. The Treble + and - inputs should be used. I haven't been able to try bi- or triwiring here at the store but did try the different ways of connecting to the terminals and agree that Treble + and - inputs are the most musical...

I tried many materials (various types of sand, lead shots, textiles) and experimented with different amounts of filling (from full to less than 1/10th) with the Katan floor stands. Those stands are very similar to the 109 stands in construction. They always sounded best empty. What about tri-wiring...

And what about the hight of the stands for the Majik 109 som say the Supertweeter chould be playing over ear hight? The standard floor stands have just the right height. The height of the bass unit above the floor is a more critical parameter than the height of the supertweeter, in my opinion. OK b...

In my room the 109's perform best 7,8cm from back wall. I had a hard time finding the optimal placement and had mine around 19cm at first. It was when I got a proper installation by my dealer he found that they should be much closer to back wall than I had been experimenting with. I have a door ope...