I too am very disappointed that the Linn forum has been closed down but in retrospect I am not at all surprised. When I had an all Naim (well mostly) system I was always aware that Linn didn't support their old customers to the same extent that Naim did with repairs. This told me that they didn't r...

Selling my M140's in walnut in pristine condition with original boxes and the upgrade stands

1600€ plus shipment

Selling my MDSM/2 (with Exakt links, HDMI 1.3) - the unit is 2,5 years old in black colour and comes in near mint condition very well looked after, with box and all what was included when buying new.

2350€

Hi Lefreak,

Is the 2200/D still for sale, if so please just send me a PM?

Hi,

Please check your PM's.

Hi,

What would be the cost including shipment to Germany?

Cheers

Ingo

Bump!
New price 1800€

I'm selling due to upgrade my MDS-I/black (same as DSM without HDMI) in near mint condition and perfect working order. Comes with Linn EU or UK mains lead, original box and all accessories including the new slim remote control REM 020.
2000€ plus shipment from Germany

Thanks Fredrik I'll consider it... what would a stereo Sagatun cost me?

Ingo

Hi Fredrik, My question would be, is there any way to connect my fully aktiv M140's to one of your pre-amps including my TV? To be clear I really like my setup but I'm looking further. At the moment I'm running my system as the following: Mds-I, M6100, M140's - of course I would have to add a M2100 ...

Hi,

I'm still looking for Akurate 212 speakers in walnut veneer - preferably the latest version, but not necessarily.
If you got a pair for sale please post me...

Hi Christoph,

bin am K400 interessiert und wohne auch in München, könnte also vorbei kommen und die Kabel abholen...

Grüße

Ingo

After a long time and to let have the new amp its break-in, I also owned a new pair of 140's in Walnut just to match the rest of my furniture... I've done the disconnection of the ground loop wire and indeed it does something quite positive sound-wise, I bought the recommended Micro-connect LAN cabl...

Hi Rudi, Very easy to do without any damage on the speakers veneer, using a plastic card like a credit card preferably an old one you are not using any more... Go with one edge of the card between the cabinet and the rubber surrounding of the metal grills on the upper side and move a little around a...

Hi Rudi, As Fredrik stated these are indeed two different things, the bungs are just applicable where space does not allow any appropriate placement, whereas the 2db cut would just make the overall musical picture more sophisticated if this would give a good description. There are other things one c...

A very good and easy to do option to improve performance, to my ears a very fine enhancement, could be made on a Majik DS-I. If one removes the casing there is on the Dynamik PSU the mains wire coming from the On/Off switch and ending on the board while crossing a copper coil, this mains wire appear...

I also tightened all the screws inside the MDS-I with a torque setting of 0,3Nm on the audio board (one would have to remove the Dynamik compartment completely) and 0,4Nm on the Dynamik board, it really makes a difference, just playing music...

Just tightened all screws on both the M140's driver to a torque setting of 1,2Nm and it sounds very nice overall...

Just a short update... The amp went to my retailer for an inspection and indeed some contacts on the Dynamik board needed a resoldering, as I got it back it did not sound any better, today I talked to him again on the phone and he will send me a brand new M4100 in exchange. Now this is what I would ...

Charlie1, Many thanks for sharing your experience here, in the meantime I contacted Linn again and they said the following: The Majik 140 Loudspeakers drive units do not have a torque setting. We use an electric driver set to a certain setting. I would suggest tightening the drive units hand tight a...

Charlie1,

BTW: Do you have the correct Torque settings for the 140´s, as I may consider at a later stage to get a fine torque driver for a better result.

Cheers

ogni

The tundem I did, having the speakers about 32cm from the back wall with a toe-in of 0,5cm. I also tightened the drivers as they seemed to be somewhat loose at finger feeling, given that I usually screw on watches, so very carefully as I did with my previous Ninkas. Well I got a foto, but shame on m...

In the meantime I've contacted Linn Helpline about this issue... Linn said the following: It should be noted that carrying out this modification has invalidated your warranty. You should have two pieces of foam to put in place, the first wraps vertically around the cables on the left hand side and t...

I also see the need to reduce the bass on my 140's having the upgrade bases already installed, but as Charlie1 said there is a lot of wool when you open it. This I know from some modification on my Ninka's can have a major impact on sound if it isn't correctly in place. Is there maybe anyone who kno...

With A to B I meant, my amp to one untouched in original condition. I also did completely remove the grounding cable, but this as well sounded like something is missing, just not right. I've noticed the main power wire coming from the PSU-board leading into the on/off switch is crucial, or rather it...