Search found 348 matches

by k_numigl
2024-01-03 22:05
Forum: Inside
Topic: Karousel installation warning
Replies: 14
Views: 30401

Re: Karousel installation warning

Yes, thanks for the 'translation'.

I doubt we can control it to this presumably perfect state, but to avoid the excessive tangential force is obviously already beneficial. (With the 3 screws of the previous bearings this problem did not exist.)
by k_numigl
2024-01-03 19:01
Forum: Inside
Topic: Karousel installation warning
Replies: 14
Views: 30401

Karousel installation warning

The essential message is short: Avoid using the subchassis as a tool (as is done when following the Linn installation instruction). Use a 21 mm socket instead to counteract the force when tightening the upper screw by 3.5 Nm with the 20 mm socket. The mechenical reasoning is evident, so not many wor...
by k_numigl
2020-05-03 20:46
Forum: HiFi
Topic: ATC SCM40
Replies: 13
Views: 12090

Re: ATC SCM40

What is the sound of a speaker?
It is the sound of its basis. (OK, exaggerated...)
Check out Cilicus.nl - this is what a speaker demands.
My SCM50A perform lightyears better with this stand. They have been
excellent before.
BR, Klaus
by k_numigl
2020-01-11 21:26
Forum: For Sale
Topic: intel 320 ssd 300GB
Replies: 2
Views: 3237

Re: intel 320 ssd 300GB

Please, no additional requests.
I'll let you know if communications fail to result in an agreement.
BR, Klaus
by k_numigl
2020-01-08 11:25
Forum: For Sale
Topic: intel 320 ssd 300GB
Replies: 2
Views: 3237

intel 320 ssd 300GB

New, unused Intel 320 SSD, 300 GB, original packaging, 130 Euro.
Still the best sounding disk.
These were intended to be used as spares (Linofil SNAS).
I don't think I'll ever need them....
BR, Klaus
by k_numigl
2019-10-31 12:37
Forum: For Sale
Topic: SOLD -- Linn K400/200 8x 2,48m - Knekt - Lejonklou solder, from Komri installation
Replies: 2
Views: 3617

Re: Linn K400/200 8x 2,48m - Knekt - Lejonklou solder, from Komri installation

The price is 380 Euro for all 8 cables. Without Komris, though, very sorry...... Klaus
by k_numigl
2019-10-30 09:36
Forum: For Sale
Topic: ATC SCM50 ASLT - case only in rosewood
Replies: 0
Views: 3744

ATC SCM50 ASLT - case only in rosewood

For sale is a pair of empty cases of ATC's superb active SCM50 speaker as tower version. Veneer is rosewood. In order to bring it to operation, speaker chassis and 3 channel amp are needed. Original packaging comes with them: 2 double card boxes of about 30 kg each (box and speaker case). It is best...
by k_numigl
2019-10-30 09:22
Forum: For Sale
Topic: SOLD -- Linn K400/200 8x 2,48m - Knekt - Lejonklou solder, from Komri installation
Replies: 2
Views: 3617

SOLD -- Linn K400/200 8x 2,48m - Knekt - Lejonklou solder, from Komri installation

From a Komri active installation there are for sale 8x 'original K200', i.e. K400 cut into two separate strands. These have the optimum length of 2,48 m, are terminated with Linn Knekt and are soldered with Lejonklou solder by the Weller 80W station at correct temperature. Probably the best you can ...
by k_numigl
2019-03-18 16:19
Forum: Wanted
Topic: Linn Kan 1 Speakers
Replies: 1
Views: 3646

Re: Linn Kan 1 Speakers

Still looking?
I got a black ash pair.
by k_numigl
2019-03-16 15:09
Forum: Wanted
Topic: Linn Brilliant
Replies: 6
Views: 7098

Re: Linn Brilliant

Finally found it. It must have been stored in its card box for xxx years.
I suggest we agree on transportation costs and I'm happy to send it.
Perhaps use pm.

BR, Klaus
by k_numigl
2019-03-12 15:24
Forum: Wanted
Topic: Linn Brilliant
Replies: 6
Views: 7098

Re: Linn Brilliant

Hello,
Is it the round PSU in a silver case you are looking for? I think this was the first SMPS by Linn.
If so, I would have to search for it but I see a chance to find it.
BR, Klaus
by k_numigl
2019-02-05 14:45
Forum: Inside
Topic: Independent power for Urika
Replies: 8
Views: 12053

Re: Independent power for Urika

Thanks, Matt - the point is that the power supply for Urika is located on the Radikal PCB, and there might be modifications of the voltage coming from the PSU to the PCB. This is indeed the case, as I found today: The RADIKAL will only supply power to the URIKA II when the turntable is rotating. (Li...
by k_numigl
2019-02-04 13:54
Forum: Inside
Topic: Independent power for Urika
Replies: 8
Views: 12053

Independent power for Urika

I'm planning to use a conventional power supply (not SMPS) for the Urika (original version). I intended to measure the necessary voltage for the Phono Pre at the Radikal output socket - but without success. No voltage seemed to appear at any of the 5 XLR connectors of the Radikal. Does anybody know ...
by k_numigl
2018-04-25 08:34
Forum: Inside
Topic: Which tracking force scale?
Replies: 2
Views: 5156

Re: Which tracking force scale?

Thanks Thomas. In the meantime I checked a scale labeled by Project - it is also not completely un-magnetic. The effect is not large: With the pickup directly above the platform, the scale reads roughly -0.02 g (Akiva used). So perhaps one could live with that. After the arm is lowered, it should no...
by k_numigl
2018-04-23 14:14
Forum: Inside
Topic: Which tracking force scale?
Replies: 2
Views: 5156

Which tracking force scale?

Proceeding to change my pickup, I'm in need of a reliable tracking force balance. Can anyone recommend a model? I do own a 3 digit scale looking just like the Project or van den Hul model, but carrying no logo. It was a bit cheaper than those, but not much. The bad thing: The lever the diamond is pu...
by k_numigl
2018-04-19 08:52
Forum: Inside
Topic: LP12 Radikal problem
Replies: 230
Views: 200169

Re: LP12 Radikal problem

> remount them on the underside of the baseboard

Not a good idea unless you considerably enlarge the diameter of the foot cutout in the base plate.
by k_numigl
2018-04-17 13:42
Forum: Inside
Topic: LP12 Radikal problem
Replies: 230
Views: 200169

Re: LP12 Radikal problem

Now checked my Urika, too: Screws are oriented 45 deg against those of the Trampolin, BUT the screws are different and do not protrude through the rim of the feet. So total thickness is here 3 mm, too. No problem, again. BR, Klaus P.S.: I find it hard to believe that tolerances of the LP12 wooden pa...
by k_numigl
2018-04-17 13:11
Forum: Inside
Topic: LP12 Radikal problem
Replies: 230
Views: 200169

Re: LP12 Radikal problem

Thanks for the alert! Immediately checked the situation here, and there is no problem. A 40 cm ruler held in place of the trampolin shows that there is more space between the top (=inside) face of the trampolin and the motor case than the thickness of the trampolin feet (3 mm). A 3 mm thick metal pl...
by k_numigl
2017-12-01 13:07
Forum: For Sale
Topic: SOLD Linn Komri Pair, aktive
Replies: 2
Views: 4911

Re: Linn Komri Pair, aktive

The date of production is 2007. SN are communicated via pm only, because keywords like Linn Klimax or Komri seem to attract fraudulent individuals heavily. The 4k-array is aluminium since 2003. Linn tried to collect and exchange all of the previous resin versions, and due to the fact that they track...
by k_numigl
2017-11-18 12:32
Forum: For Sale
Topic: SOLD Linn Komri Pair, aktive
Replies: 2
Views: 4911

SOLD Linn Komri Pair, aktive

A pair of Linn's most outstanding speaker: Komri in active setup with Klimax Tunebox. Finish is maple, see picture. Late version. Original packaging. Price is 12750 Euro. Collection welcome, of course (Friesland Germany, not NL).
by k_numigl
2017-01-09 15:50
Forum: HiFi
Topic: Volume of Akurate and Klimax Kontrol
Replies: 1
Views: 3799

Volume of Akurate and Klimax Kontrol

For a comparison of pre amps (AK and KK) among friends we want to make sure that they play equally loud. Can someone give me a hint whether the same number on the display means that they play at the same volume? The manual says: Output 2 V rms for AK, and 8V peak (15 dBV maximum) for KK. Unfortunate...
by k_numigl
2016-04-27 15:21
Forum: HiFi
Topic: For those interested in all analog recordings
Replies: 16
Views: 16136

Re: For those interested in all analog recordings

http://www.bauerstudios.de/de/188/vinyl.html

The Studio Konzert LPs are direct to 2-track completely analogue productions. Very nice.
Best, Klaus
by k_numigl
2016-04-26 12:39
Forum: For Sale
Topic: Linn Klimax Tunebox for Akurate 242 speaker
Replies: 4
Views: 6737

Re: Linn Klimax Tunebox for Akurate 242 speaker

Hi,
There are two versions due to necessary changes (end of life) of the speaker components.
The crossover (active as well as passive) has therefore to match the speaker.

THIS CHANGE WAS IMPLEMENTED FROM s/n 1144285
The crossover offered here fits up to SN 1144284.

BR, Klaus
by k_numigl
2016-04-22 11:53
Forum: For Sale
Topic: Linn Klimax Tunebox for Akurate 242 speaker
Replies: 4
Views: 6737

Re: Linn Klimax Tunebox for Akurate 242 speaker

Price adjusted.
BR, K.
by k_numigl
2016-03-19 11:53
Forum: For Sale
Topic: Linn Klimax Tunebox for Akurate 242 speaker
Replies: 4
Views: 6737

Linn Klimax Tunebox for Akurate 242 speaker

A while ago I sold my Akurate 242 speakers to a person not wanting to go active because of the additional expense. No need to discuss this. For this reason I offer the Klimax Tunebox pair here. The tunebox is for the original version of the A242 and is in excellent condition, optically as well as te...