Yes, thanks for the 'translation'.
I doubt we can control it to this presumably perfect state, but to avoid the excessive tangential force is obviously already beneficial. (With the 3 screws of the previous bearings this problem did not exist.)
Search found 348 matches
- 2024-01-03 22:05
- Forum: Inside
- Topic: Karousel installation warning
- Replies: 14
- Views: 42423
- 2024-01-03 19:01
- Forum: Inside
- Topic: Karousel installation warning
- Replies: 14
- Views: 42423
Karousel installation warning
The essential message is short: Avoid using the subchassis as a tool (as is done when following the Linn installation instruction). Use a 21 mm socket instead to counteract the force when tightening the upper screw by 3.5 Nm with the 20 mm socket. The mechenical reasoning is evident, so not many wor...
Re: ATC SCM40
What is the sound of a speaker?
It is the sound of its basis. (OK, exaggerated...)
Check out Cilicus.nl - this is what a speaker demands.
My SCM50A perform lightyears better with this stand. They have been
excellent before.
BR, Klaus
It is the sound of its basis. (OK, exaggerated...)
Check out Cilicus.nl - this is what a speaker demands.
My SCM50A perform lightyears better with this stand. They have been
excellent before.
BR, Klaus
- 2020-01-11 21:26
- Forum: For Sale
- Topic: intel 320 ssd 300GB
- Replies: 2
- Views: 3333
Re: intel 320 ssd 300GB
Please, no additional requests.
I'll let you know if communications fail to result in an agreement.
BR, Klaus
I'll let you know if communications fail to result in an agreement.
BR, Klaus
- 2020-01-08 11:25
- Forum: For Sale
- Topic: intel 320 ssd 300GB
- Replies: 2
- Views: 3333
intel 320 ssd 300GB
New, unused Intel 320 SSD, 300 GB, original packaging, 130 Euro.
Still the best sounding disk.
These were intended to be used as spares (Linofil SNAS).
I don't think I'll ever need them....
BR, Klaus
Still the best sounding disk.
These were intended to be used as spares (Linofil SNAS).
I don't think I'll ever need them....
BR, Klaus
- 2019-10-31 12:37
- Forum: For Sale
- Topic: SOLD -- Linn K400/200 8x 2,48m - Knekt - Lejonklou solder, from Komri installation
- Replies: 2
- Views: 3700
Re: Linn K400/200 8x 2,48m - Knekt - Lejonklou solder, from Komri installation
The price is 380 Euro for all 8 cables. Without Komris, though, very sorry...... Klaus
- 2019-10-30 09:36
- Forum: For Sale
- Topic: ATC SCM50 ASLT - case only in rosewood
- Replies: 0
- Views: 4023
ATC SCM50 ASLT - case only in rosewood
For sale is a pair of empty cases of ATC's superb active SCM50 speaker as tower version. Veneer is rosewood. In order to bring it to operation, speaker chassis and 3 channel amp are needed. Original packaging comes with them: 2 double card boxes of about 30 kg each (box and speaker case). It is best...
- 2019-10-30 09:22
- Forum: For Sale
- Topic: SOLD -- Linn K400/200 8x 2,48m - Knekt - Lejonklou solder, from Komri installation
- Replies: 2
- Views: 3700
SOLD -- Linn K400/200 8x 2,48m - Knekt - Lejonklou solder, from Komri installation
From a Komri active installation there are for sale 8x 'original K200', i.e. K400 cut into two separate strands. These have the optimum length of 2,48 m, are terminated with Linn Knekt and are soldered with Lejonklou solder by the Weller 80W station at correct temperature. Probably the best you can ...
- 2019-03-18 16:19
- Forum: Wanted
- Topic: Linn Kan 1 Speakers
- Replies: 1
- Views: 3738
Re: Linn Kan 1 Speakers
Still looking?
I got a black ash pair.
I got a black ash pair.
- 2019-03-16 15:09
- Forum: Wanted
- Topic: Linn Brilliant
- Replies: 6
- Views: 7259
Re: Linn Brilliant
Finally found it. It must have been stored in its card box for xxx years.
I suggest we agree on transportation costs and I'm happy to send it.
Perhaps use pm.
BR, Klaus
I suggest we agree on transportation costs and I'm happy to send it.
Perhaps use pm.
BR, Klaus
- 2019-03-12 15:24
- Forum: Wanted
- Topic: Linn Brilliant
- Replies: 6
- Views: 7259
Re: Linn Brilliant
Hello,
Is it the round PSU in a silver case you are looking for? I think this was the first SMPS by Linn.
If so, I would have to search for it but I see a chance to find it.
BR, Klaus
Is it the round PSU in a silver case you are looking for? I think this was the first SMPS by Linn.
If so, I would have to search for it but I see a chance to find it.
BR, Klaus
- 2019-02-05 14:45
- Forum: Inside
- Topic: Independent power for Urika
- Replies: 8
- Views: 12564
Re: Independent power for Urika
Thanks, Matt - the point is that the power supply for Urika is located on the Radikal PCB, and there might be modifications of the voltage coming from the PSU to the PCB. This is indeed the case, as I found today: The RADIKAL will only supply power to the URIKA II when the turntable is rotating. (Li...
- 2019-02-04 13:54
- Forum: Inside
- Topic: Independent power for Urika
- Replies: 8
- Views: 12564
Independent power for Urika
I'm planning to use a conventional power supply (not SMPS) for the Urika (original version). I intended to measure the necessary voltage for the Phono Pre at the Radikal output socket - but without success. No voltage seemed to appear at any of the 5 XLR connectors of the Radikal. Does anybody know ...
- 2018-04-25 08:34
- Forum: Inside
- Topic: Which tracking force scale?
- Replies: 2
- Views: 5259
Re: Which tracking force scale?
Thanks Thomas. In the meantime I checked a scale labeled by Project - it is also not completely un-magnetic. The effect is not large: With the pickup directly above the platform, the scale reads roughly -0.02 g (Akiva used). So perhaps one could live with that. After the arm is lowered, it should no...
- 2018-04-23 14:14
- Forum: Inside
- Topic: Which tracking force scale?
- Replies: 2
- Views: 5259
Which tracking force scale?
Proceeding to change my pickup, I'm in need of a reliable tracking force balance. Can anyone recommend a model? I do own a 3 digit scale looking just like the Project or van den Hul model, but carrying no logo. It was a bit cheaper than those, but not much. The bad thing: The lever the diamond is pu...
- 2018-04-19 08:52
- Forum: Inside
- Topic: LP12 Radikal problem
- Replies: 230
- Views: 205702
Re: LP12 Radikal problem
> remount them on the underside of the baseboard
Not a good idea unless you considerably enlarge the diameter of the foot cutout in the base plate.
Not a good idea unless you considerably enlarge the diameter of the foot cutout in the base plate.
- 2018-04-17 13:42
- Forum: Inside
- Topic: LP12 Radikal problem
- Replies: 230
- Views: 205702
Re: LP12 Radikal problem
Now checked my Urika, too: Screws are oriented 45 deg against those of the Trampolin, BUT the screws are different and do not protrude through the rim of the feet. So total thickness is here 3 mm, too. No problem, again. BR, Klaus P.S.: I find it hard to believe that tolerances of the LP12 wooden pa...
- 2018-04-17 13:11
- Forum: Inside
- Topic: LP12 Radikal problem
- Replies: 230
- Views: 205702
Re: LP12 Radikal problem
Thanks for the alert! Immediately checked the situation here, and there is no problem. A 40 cm ruler held in place of the trampolin shows that there is more space between the top (=inside) face of the trampolin and the motor case than the thickness of the trampolin feet (3 mm). A 3 mm thick metal pl...
- 2017-12-01 13:07
- Forum: For Sale
- Topic: SOLD Linn Komri Pair, aktive
- Replies: 2
- Views: 5008
Re: Linn Komri Pair, aktive
The date of production is 2007. SN are communicated via pm only, because keywords like Linn Klimax or Komri seem to attract fraudulent individuals heavily. The 4k-array is aluminium since 2003. Linn tried to collect and exchange all of the previous resin versions, and due to the fact that they track...
- 2017-11-18 12:32
- Forum: For Sale
- Topic: SOLD Linn Komri Pair, aktive
- Replies: 2
- Views: 5008
SOLD Linn Komri Pair, aktive
A pair of Linn's most outstanding speaker: Komri in active setup with Klimax Tunebox. Finish is maple, see picture. Late version. Original packaging. Price is 12750 Euro. Collection welcome, of course (Friesland Germany, not NL).
- 2017-01-09 15:50
- Forum: HiFi
- Topic: Volume of Akurate and Klimax Kontrol
- Replies: 1
- Views: 3861
Volume of Akurate and Klimax Kontrol
For a comparison of pre amps (AK and KK) among friends we want to make sure that they play equally loud. Can someone give me a hint whether the same number on the display means that they play at the same volume? The manual says: Output 2 V rms for AK, and 8V peak (15 dBV maximum) for KK. Unfortunate...
- 2016-04-27 15:21
- Forum: HiFi
- Topic: For those interested in all analog recordings
- Replies: 16
- Views: 16392
Re: For those interested in all analog recordings
http://www.bauerstudios.de/de/188/vinyl.html
The Studio Konzert LPs are direct to 2-track completely analogue productions. Very nice.
Best, Klaus
The Studio Konzert LPs are direct to 2-track completely analogue productions. Very nice.
Best, Klaus
- 2016-04-26 12:39
- Forum: For Sale
- Topic: Linn Klimax Tunebox for Akurate 242 speaker
- Replies: 4
- Views: 6882
Re: Linn Klimax Tunebox for Akurate 242 speaker
Hi,
There are two versions due to necessary changes (end of life) of the speaker components.
The crossover (active as well as passive) has therefore to match the speaker.
THIS CHANGE WAS IMPLEMENTED FROM s/n 1144285
The crossover offered here fits up to SN 1144284.
BR, Klaus
There are two versions due to necessary changes (end of life) of the speaker components.
The crossover (active as well as passive) has therefore to match the speaker.
THIS CHANGE WAS IMPLEMENTED FROM s/n 1144285
The crossover offered here fits up to SN 1144284.
BR, Klaus
- 2016-04-22 11:53
- Forum: For Sale
- Topic: Linn Klimax Tunebox for Akurate 242 speaker
- Replies: 4
- Views: 6882
Re: Linn Klimax Tunebox for Akurate 242 speaker
Price adjusted.
BR, K.
BR, K.
- 2016-03-19 11:53
- Forum: For Sale
- Topic: Linn Klimax Tunebox for Akurate 242 speaker
- Replies: 4
- Views: 6882
Linn Klimax Tunebox for Akurate 242 speaker
A while ago I sold my Akurate 242 speakers to a person not wanting to go active because of the additional expense. No need to discuss this. For this reason I offer the Klimax Tunebox pair here. The tunebox is for the original version of the A242 and is in excellent condition, optically as well as te...